Mold testing in southwest Florida, Bonita Springs. What Is Mold Testing? How Is Mold Testing Performed?
Broadly speaking, most mold testing involves taking a sample of either the air or a surface. Essentially, a mold inspector “tests” the air or surface to find out what kind of mold exists and/or if the mold found is able to grow in the area tested.
Mold Testing: Air Samples
Air samples can be taken and analyzed in a variety of ways. The most common method uses a “spore trap” and is called a “spore trap sample.” Spore traps work by having a known volume of air pass impact a sticky surface as it passes through the spore trap sampling device. Most of the particles in the air also impact this sticky surface and consequently adhere to, and are captured on, this sticky surface. Mold spores comprise a subset of these ‘particles in the air’ and also are captured on the sticky medium inside the spore trap. When the spore trap is sent to the mold testing laboratory for analysis, the mold laboratory opens the spore trap, applies some stains to the sticky surface that the mold spores can absorb, and then identifies and quantifies the types of mold spores captured during the sampling process. There are other methods of mold sampling, including culturing or growing the mold spores captured from the air, but these are less commonly used.
Mold Testing: Surface Samples
Surface samples can be taken in a variety of ways. The three most common methods are:
After the mold samples arrive at the mold testing library there are many ways to analyze these mold samples. The most common methods involve transferring relevant sections (or all) of the submitted mold sample onto a glass microscope slide, adding a stain that mold spores can absorb, and then evaluating the sample for evidence of mold growth.
Should I Have Mold Testing Performed?
It depends. Sometimes mold testing is not necessary. For example, if there is a known roof leak that led to mold growth in a known, confined area, you should take appropriate actions, including fixing the roof leak and having the mold removed in an appropriate and safe manner.
There are many situations where taking a mold sample does not add any value and is not necessary. However, if you are purchasing a new home and suspect that evidence of a water problem or a mold problem may have been covered up, then mold testing might be helpful. So whether you should have mold testing performed depends on your actual situation, your budget and other concerns. Here are situations for you to consider:
If the mold testing results will not affect what you do, then you probably don’t need mold testing. From our two examples above:
Mold tests are not perfect. False negative and false positive results do sometimes occur. Mold testing results are one piece of information, sometimes an important piece. But other pieces of information are also needed and are often more important and should take precedence over the mold testing results. For example, a good visual inspection of the property is usually essential for a good mold investigation and often more important than the mold testing results.
goals of a Mold Inspection
There are two goals of a mold inspection. The first is to find if and where mold is growing in your home. The second is to find the water problem which caused the mold to grow in the first place.
Along with inspecting for mold, mold testing might also be a good option to help you find mold growth, especially if it is hidden.<br><br> After you have found the mold and the moisture problem you can move on to the mold removal process.</p>
Why You Should Have A Mold Inspection
The obvious reason to have a mold inspection is if you think you have a mold problem in your home. Even if you already know where mold is growing in your home it is a good idea to perform a mold inspection since visible mold growth often means there is more mold growing somewhere out of view.
Signs of Mold
Some common reasons to suspect you could have a mold problem include:
You can look here for more signs of mold problems.
Hiring a Professional Mold Inspector
It’s always best to hire a professional mold inspector to do the mold inspection for you. Thanks to mold inspectors’ experience and their knowledge of spots where mold most often hides, you can be sure that if there’s any mold in your home that they will find it.
Mold inspectors also use special equipment like moisture meters and fiber optics. This allows them to find hot spots where mold is most likely growing and look into hidden areas such as behind walls. This way they can find any and all hidden mold while barely disturbing your home.
Health Risks If you do opt to perform the mold inspection yourself you should be aware of the potential health hazards during a mold inspection Firstly if you are especially sensitive to mold or have bad allergies you should not perform the mold inspection yourself. The same goes for if you are sick or elderly. The mold inspection should be performed by someone healthy and not at risk If you do find large areas of mold during the inspection be careful not to disturb it as this can spread spores or even mycotoxins throughout your home. Large mold colonies should only be disturbed once you have set up the proper containment during remediation
History of Water Problems
It’s important to think of recent water problems you’ve had in your home when it comes to preparing for a mold inspection.
If you hire a professional mold inspector it’s a good idea to let them know about any leaks, floods or any other moisture problems you’ve had in your home. If you are performing the mold inspection yourself then knowing about places which had water problems in the past will give you clues about where the mold is most likely growing.
There might have even been water problems in the past which you never found out about. By looking for signs of moisture like warped surfaces, water stains or peeling paint you might find recent water problems which have lead to mold growth.
You should also identify areas which have the potential for water problems such as where pipes run, air conditioner leaks, possible leaking roofs or where water collects after flooding.
Finding Mold During the Inspection
If you decide to do the mold inspection yourself then you need to thoroughly search for mold in every room of your house including the attic and the basement.
Special attention should be paid to areas around water sources such as near the shower or bathtub, sinks or pipes. You should check especially carefully the areas which have had any history of moisture problems in the past. During your search for mold if you do find any water leaks this can then lead you to where mold is growing.
Some common places where mold often grows is on substances high in cellulose such as drywall, under carpets, in insulation or in ventilation ducts.
Visit Where Mold Grows for more help with finding mold and for more places where mold often grows.
If you cannot see mold in a room it doesn’t mean there is none there. Mold can often grow hidden from view behind walls, above ceilings, under floors or in air conditioning ducts. If you find small spots of mold on a surface it could mean there is a much larger mold colony growing hidden away on the other side.
Besides using your eyes pay attention to any odors. The smell of a mold colony can help you to narrow down where mold is hiding. Any health issues you notice which occur when you’re in certain areas of your home can also alert you to the presence of nearby mold. Symptoms such as sneezing and sore or water eyes can be tell tale signs of mold growth nearby.
Don’t Disturb Mold in Naples Florida
If you do find large areas of mold during the inspection be careful not to disturb it if possible as this can spread spores or even mycotoxins throughout your home. Large mold colonies should only be disturbed once you have set up the proper containment during remediation.
Sometimes you might find what you think is mold but what might actually be dark soot or just dirty spots. Look closely to be sure that what you have found is mold, disturbing it minimally if you need to examine it physically.
If you are unsure you can always use a mold test kit to verify. Testing can also be helpful if for some reason you want to identify the species of mold you have found in your home.
Finding Water Problems
The second stage of mold inspection after finding mold growth is to find the water problem that caused the mold in the first place. There is no point going to the trouble of finding and removing mold in your home if the water problem that caused it is not fixed and then soon causes the mold to return.
You should search your home for any water leaks or evidence of leaks. Besides stopping the leak or other water source you will need to take action to make sure it doesn’t reoccur in the future. Once you have found the cause of the mold in your home you will first need to fix it and then clean up any remaining moisture.
After Finding Mold
After you have found the mold in your home you need to determine the size and extent of the mold colony before you can begin to remove it. If the mold looks like it might be toxic you should think about having it tested to determine its species so you’ll know whether you can remove it yourself or whether you should hire a professional.
In either case you should not disturb any large mold colonies you find yet since proper containment should be set up before mold removal to prevent spores spreading throughout your home.
After the mold inspection you might feel mold testing is warranted if you couldn’t find any mold. Mold testing can either rule out the presence of mold or help track down its location if it’s hidden.
If mold was found and you decide you want to test the mold to find out its species, eg in case it’s toxic or to confirm it really is mold, then testing will also tell you what you want to know.
You can visit Mold Testing if you want to find out more information about testing for mold in your home.
Once you have found all the mold in your home you’re ready to move on to thinking about the mold removal and remediation process.
See the Mold Removal page for a guide to removing and remediating mold in your home.
After you have removed and remediated a mold problem you might want to perform the mold inspection process again to make sure that the mold clean up was successful.
Swab testing is performed by an inspector to test fungal growth for the exact species. The inspector uses a sterile cotton swab to gather some of the mold growth which is then sent to a lab to be cultured and analyzed. This type of testing can be useful when occupants have become ill with a fungal infection, but does not add much useful information to the inspection that an average building occupant may need.
Tape-lift testing is performed by gathering a small portion of the suspect material on a clear piece of sticky material and then placing it on a glass slide. The sample is then sent to a lab for analysis under a microscope. The general genus and characteristics of the tested mold is then reported to the inspector. This type of testing can be useful to determine if a discoloration is actually mold growth, or if the spores found in an air sample are being released from a specific location of mold growth. The truth of the matter is that mold growth is often readily visible by an inspector, and the actual type of mold growing may not be relevant to the source of the mold or the plan for remediation.
Mold spore air testing
An air test is performed by pulling a measured amount of air through a plastic cassette. The particulate material in the air will then stick to a glass slide that is enclosed in the cassette. The sample is then sent to a lab for visual analysis. The lab technicians will count the individual types of mold spores found in the sample and generate a report of spores per cubic meter. The inspector will generally take a baseline sample of the outside air for comparison. The indoor mold spore sample and outdoor air test are compared and a determination is made as to whether it is likely that there is a high fungal reserve in the home. Due to the nature of this type of testing, it is important to understand that it can only provide a general idea of the mold spore levels in the home. Mold spore testing is a good piece of information to add to an indoor air quality inspection but it’s relevance is based solely on the experience and interpretation of the inspector.
We are going to tell you something right away about mold inspections and mold testing that is going to make 99% of all other mold companies and mold inspectors squirm. We know of no other mold company that will reveal this but we have been doing so for years because it is our mission to get good factual information about mold out there to combat all the misinformation and fiction that dominates our industry.
Ready? Well, if you already see visible mold, you usually do NOT need a mold inspection or mold testing. If you already see visible mold, you simply need to remove it following industry standard guidelines as we discuss below.
There ARE many cases where a mold inspection and mold testing IS a good idea and we discuss this below. We also discuss below why home mold tests that you can buy at hardware stores are a waste of money.
But for now, the question begs: Why is it so relevant that testing is unnecessary if you already see mold? Because it will save most consumers lots of money! In other words, many consumers who call us (and presumably other mold companies) already see visible mold and think they therefore need to get it tested to determine what type of mold it is, whether its toxic, and other characteristics. But once you see visible mold, testing is usually unnecessary and a waste of money.
Do you think most companies who inspect for mold care to reveal this when they have an easy $250-$1000 mold inspection on the table from a worried customer who is misinformed? Obviously not. Of course, there are some companies and individuals who are truthful and we commend them but they are sadly few and far between and drowned out by the others.
So why is a mold inspection and mold testing almost always unnecessary if you already see visible mold? Don’t you need to know, for example, what kind of mold it is so you can determine whether its toxic? In fact, in most cases, the surprising answer here is “no.” For starters, so called “Black Mold” is a term that is badly misused and misunderstood as we already discussed in our other Industry Shakeup Article, The Truth About Toxic Black Mold: It’s Probably Not What You Think.
Secondly, once you already see visible mold, knowing what type it is, for example, is usually irrelevant because at this point, you or a Mold Professional (like Moldman!) simply need to get rid of the mold following proper Mold Remediation and Mold Removal Principles.
Doesn’t the type of mold matter in determining the right way to properly remove the mold? No. In fact, once visible mold is present, the same Mold Remediation Principles referenced above are followed to remove it regardless of the color, species, etc.
If this all sounds too hard to believe, especially coming from a mold company, don’t take our word for it. Here is what the Environmental Protection Agency says verbatim:
“Is sampling for mold needed? In most cases, if visible mold growth is present, sampling is unnecessary. Since no EPA or other federal limits have been set for mold or mold spores, sampling cannot be used to check a building’s compliance with federal mold standards. Surface sampling may be useful to determine if an area has been adequately cleaned or remediated. Sampling for mold should be conducted by professionals who have specific experience in designing mold sampling protocols, sampling methods, and interpreting results. Sample analysis should follow analytical methods recommended by the American Industrial Hygiene Association (AIHA), the American Conference of Governmental Industrial Hygienists (ACGIH), or other professional organizations.”(Source: EPA)
Notice the EPA says that not only is mold testing usually unnecessary when visible mold is present, but they also tell you that there are no federal guidelines yet for determining the amount of mold spores that is safe or dangerous. This is also something we tell our clients all the time, and by now you can probably guess is a rather important fact that most other companies will of course not bother to reveal! (Although no federal guidelines exist on mold spore counts, we can compare the number of indoor mold spores to the number of outdoor mold spores, for example, to get a relative idea of the levels of mold present in the tested environment. Thus, when a mold inspection and test is needed, knowing the indoor and outdoor spore counts is essential.)
The EPA paragraph did give an indication that mold testing can be useful in certain circumstances, though. We will expand on this point further, and answer the question:
When should a mold inspection and mold testing be considered?
Now why hire a mold professional at all when you can just go to your local home improvement store and just buy a home mold test kit and do it yourself?
Why Over-The-Counter Home Mold Tests Kits Are A Ripoff:
Don’t take our word for it. Here is what the U.S. Government EPA says, verbatim: “Sampling for mold should be conducted by professionals who have specific experience in designing mold sampling protocols, sampling methods, and interpreting results. Sample analysis should follow analytical methods recommended by the American Industrial Hygiene Association (AIHA), the American Conference of Governmental Industrial Hygienists (ACGIH), or other professional organizations.”
The Trouble With Mold in the Home
Mold is a fungus that comes in various colors (black, white, green, or gray) and shapes. While some molds are visible and even odorous, mold can also grow between walls, under floors and ceilings, or in less accessible spots, such as basements and attics. Mold does best in water-soaked materials (paneling, wallboard, carpet, paint, ceiling tiles, and the like), but can survive in almost any damp location. Mold can grow in houses situated in the desert, and it can grow in homes in hot and humid climes.
Here are some common places in a home where mold is likely to take hold:
Besides presenting an ugly appearance and, sometimes, an unpleasant odor, mold can cause health problems. In the worst cases, a few types of molds produce mycotoxins, which can cause rashes, seizures, unusual bleeding, respiratory problems, and severe fatigue in some people. Fortunately, most molds are of the non-toxic variety.
For more on the hazards of mold, see the article on this site: Toxic Mold Health Risks and the resources listed below.
How to Detect Mold in Your Basement or Home
You won’t always know if there is mold in a house you’re considering buying, but you can take a few easy steps to try and find out.
Be on the lookout for mold. When you’re thinking about buying a home, look for the elements above to figure out if there are any obvious signs of mold or the potential for mold. Keep your eyes peeled for standing water in the basement, water marks on walls (particularly recent-looking stains), or musty smells (particularly in bathrooms, kitchens, laundry rooms, basements, cabinets with plumbing, or other areas with plumbing).
If you’re looking at a newer home, find out whether it is built with “synthetic stucco,” also called the Exterior Insulation and Finish System (EIFS). This airtight barrier is supposed to improve insulation but, if improperly installed, may allow water penetration and mold growth on the inside of walls.
Ask your home inspector. If you have the home professionally inspected before you buy it, your home inspector may see obvious signs of mold or water damage. While it’s not the inspector’s job to look for mold, most home inspectors will mention obvious signs of water damage and the possible presence of mold. And, because the inspector will poke around in spaces you might not, he or she may see things you wouldn’t. For more information, see the Nolo article, “Getting a Home Inspection.”
Don’t hesitate to ask whether the inspector saw signs of mold or potential mold dangers, and ask that these results be included in the inspection report. Some inspectors may be wary of this, because they want to avoid liability for any mold-related problems. But all should be comfortable talking to you about whether they saw anything suspicious.
Ask the seller to disclose any mold or water-related problems. Some states, including California, require sellers to disclose information about mold. Keep in mind that the seller’s duty to disclose only relates to things the seller knows about or reasonably should know about — he or she doesn’t have a duty to go poking around in the walls to see if there’s mold, for example.
In states where mold disclosure is not required, you can still ask for such disclosure. In addition, ask questions about things that could lead to mold growth, such as “Have any pipes ever burst?” or “Have any of the windows ever leaked?”
For details on state disclosure requirements, see the Nolo article, “Required Disclosures When Selling U.S. Real Estate.”
Listen to agents and appraisers. In some states, real estate agents or brokers have a duty to disclose problems they know about. Likewise, an appraiser should notify you of any obvious sign of a mold problem if it could affect the value of the property.
Add a mold-related contingency to your offer. Assuming you’re interested enough in the house to place an offer on it, making the sale contingent on your satisfaction with the results of specific inspections for mold lets you back out if the inspection finds a mold problem. Unfortunately, tests for mold are difficult to conduct and expensive. And, according to the U.S. Environmental Protection Agency (EPA), testing for mold isn’t usually necessary when it’s visible on surfaces. Most people will end up relying on the detection methods discussed above.
Nevertheless, if you have reason to suspect there’s hidden mold in the home, you might elect to hire a professional mold testing company. These companies test the air in and around the home. They can also dig into walls and take samples, which they later test in a laboratory. Testing the air usually costs several hundred dollars. If the company takes wall samples, the cost will be even higher.
Should You Buy a House With Mold Problems?
If you find a house and discover it has mold problems, should you buy it anyway? If you or a family member has asthma or if a baby or an elderly person will live in the house, you’ll want to be especially concerned about limiting exposure to mold. You’ll have to decide whether the cost of removing the mold and fixing the source — both in time and money — is worth the price you’ll pay.
If you have an inspection contingency and the mold is revealed as part of the inspection, or if you have a specific mold contingency, you have a bargaining chip. You can ask the seller to reduce the asking price, to fix the problem, or you can choose to walk away from the deal. (To learn more about inspection contingencies, read Nolo’s article, “Contingencies to Include in Your House Purchase Contract.”)
What If The Home Seller or Builder Did Not Disclose a Known Mold Problem?
If the prior owner of a house you bought knew of the presence of mold and was required to disclose this information under state real estate disclosure rules, but did not do so, the owner may be liable to you for failure to disclose. See the Nolo article, “Mold: Who to Sue” for more on the subject. Other useful Nolo articles include “Home Defects: Sue the Seller,” which provides useful advice on determining who’s legally responsible for home defects and how to file suit. For advice on dealing with problems in a new house, see “New-Home Defects: Holding Your Builder Responsible.”
Resources and State Laws on Mold in Homes
The U.S. Environmental Protection Agency (EPA) provides extensive information in the Molds and Moisture section of the EPA website, including advice on cleaning up mold after a flood in your basement. The Centers for Disease Control and Prevention (CDC) also has useful resources on mold on its website.
Most of the mold-related regulations occur at the state level. For example, California, Indiana, Maryland, New Jersey, and Texas have passed legislation aimed at developing guidelines and regulations for mold in indoor air. Here are some resources to find out your state rules on mold:
The National Conference of State Legislatures (NCSL) has an Environmental Health Legislation Database (see ) that tracks state legislation on environmental health hazards, including mold.
Naples Mold Remediation
The goal of a mold remediation is to remove and/or clean mold-impacted materials using approved standards and safe work practices that protect occupants and workers.
For every mold job, the assessor should prepare a written (Report) Mold Remediation Work Plan (MRWP). This report should identify the source of moisture intrusion and/or humidity within the building and the process to correct the contamination as well as what is required to “clear” the property when cleanup is accomplished.
Things to remember for your Remediation: